See FISITA Library items from Franco Arosio
EB2021-MDS-003
Paper + Video + Slides
Abstract
Dr. Eng. Hossein Najafi, Oerlikon, SWITZERLAND
Ing. Cameron Eibl, Oerlikon, UNITED STATES
Ing. Franco Arosio, Oerlikon, GERMANY
Dr. Eng. Arkadi Zikin, Oerlikon, SWITZERLAND
Mr. Thilo Krah-Tomala, Oerlikon, GERMANY
The automotive industry is faced with a significant impending regulatory and environmental challenge: dramatically and cost effectively reduce brake dust emissions. To meet this challenge at scale, a high performing wear and corrosion resistant solution is needed that combines the advantageous economics of cast iron with a cost effective and indualizable coating. Alternative technologies such as composite brake discs are untenable for mass production, due to high costs and poor mass market value. The solution is to leverage Oerlikon’s patented and big data driven Rapid Alloy Design (RAD) platform to engineer disruptive new materials specifically tailored for the application and intended deposition methods.
Oerlikon has recently developed two new materials using the RAD platform balancing the corrosion, wear, mechanical, substrate, manufacturing, cost, and environmental parameters demanded by the brake disc application. This development leveraged two promising and industrialized deposition methods, extra high-speed laser cladding (EHLA) and high velocity oxygen fuel (HVOF) thermal spray. From a performance standpoint, the materials combine high corrosion performance and high wear resistance in a crack free solution. The materials are manufactured using low cost conventional atomization techniques and deposited as a single layer coating, significantly reducing processing costs. Environmental constraints are incorporated into the material design by eliminating carcinogenic Cobalt, Nickel, and Copper.
This article communicates the latest results on the deposition and performance of the new materials on brake discs using EHLA and HVOF technologies.
EuroBrake 2021
ACB
Downloads
EB2021-MDS-006
Paper + Video + Slides
Abstract
Ing. Franco Arosio, Oerlikon, GERMANY
Dr.-Ing. Ingo Lange, Oerlikon, SWITZERLAND
The rise of Electrical Vehicles (EVs) is unstoppable and EVs will become a key part of the mainstream automotive market. According to recent post-COVID-19 scenarios based on IHS data, EVs will surge up to 14% of global passenger car sales in 2027 and go up to 57% in 2040. The electrification of future mobility concepts is going along with new requirements also for the brake system. EVs with regenerative braking applications utilize the traditional friction brakes in fewer circumstances due to recuperation: therefore the risk of superficial corrosion increases. In case of an emergency brake situation the basic requirement is that the braking surface will be free of corrosion to have maximum brake power. Thus, the corrosion-free condition on the braking surface is a safety requirement at any time.
The state of the art solution consists of paintings or “coatings”, such as ultraviolet (UV)-hardening paint, Zn or Zn/Al paints, which can perform well in new conditions (e.g. up to 120 hours in standard UNI ISO 9227 salt fog chamber). But these solutions will be easily abraded within approximately 20 standard-condition braking applications. The corrosion-free condition during the lifetime of the disc is not achieved yet in the current state of the art; rust or corrosion can seriously downgrade the braking performances.
This paper is describing an innovative 2-step process to improve the corrosion and wear resistance of standard cast iron brake discs. In the first step, the amount of undesired graphite lamellae will be reduced from the surface with customized parameters, according to the individual types of grey cast iron material of the substrate. This pre-process is followed by a thermochemical diffusion process including controlled oxidation of the substrate resulting in high corrosion protection of the rotors.
The authors will produce proof of corrosion resistance up to 300 hours in salt conditions according to UNI ISO 9277. In addition, bench tests and vehicle endurance tests have been performed in cooperation with Tier 1 and OEMs and have shown increased wear resistance even with non-electric cars and with standard ECE brake pads.
The novel surface solution could be also applied to non-functional areas of the brake disc like cooling channels, bell and swan neck in order to substitute the current paintings.
In summary, the new 2-step heat treatment process is a price competitive solution for corrosion protection of functional and non-functional areas of iron casted brake discs over the entire lifetime, especially on EVs with strong recuperation. But this solution also works for hybrid and conventional cars in preferably on the rear axis with low-abrasive brake pads (e.g. NAO pads). Finally, even when the vehicle fleet goes all-electric, dust emission from brakes and tyres will still pollute the environment. Addressing this topic, the authors will provide an outlook of the ongoing activities to reduce brake dust emissions with innovative surface solutions.
EuroBrake 2021
CLF
Downloads
Error message goes here.
Franco is the Project Manager Brake Disc at Oerlikon.
He is responsible for the technical development of the coated discs as well as quality, testing and is the first tech contact to customers, suppliers and partners. Prior to the current job, Franco worked for Brembo as a Resident Project Engineer at Daimler, Sindelfingen, on the project Coated Brake Discs.
He studied mechanical engineering at Politechico di Milano, with a master at THI Ingolstadt in International Automotive Engineering with focus on technical development and corrosion protection. In his thesis he investigated about Contact Corrosion in Lightweight Design at InnCoa, Germany.