top of page

FISITA Library

EB2021-FBR-004

Video + Slides

Abstract

Dr. Qiang Liu, Tribology Research Institute Southwest Jiaotong University Chengdu 610031, P. R. China, CHINA

Prof. Jiliang Mo, Tribology Research Institute Southwest Jiaotong University Chengdu 610031, P. R. China, CHINA

Dr. Zaiyu Xiang, Tribology Research Institute Southwest Jiaotong University Chengdu 610031, P. R. China, CHINA

Dr. Anyu Wang, Tribology Research Institute Southwest Jiaotong University Chengdu 610031, P. R. China, CHINA

Mr. Wei Chen, Tribology Research Institute Southwest Jiaotong University Chengdu 610031, P. R. China, CHINA

Mr. Honghua Qian, Tribology Research Institute Southwest Jiaotong University Chengdu 610031, P. R. China, CHINA


Research and /or Engineering Questions/Objective: Friction-induced vibration is a common phenomenon on the frictional contact interface between two solids in relative motion, which can be observed in many mechanical applications, especially for the brake system. The friction-induced vibration originated from the friction interface can transmit through the rigid connection structure of mechanical system and forms a vibration transmission path. The vibration transmission path, mainly reflected by the natural frequency and the damping ratio, influences the friction-induced vibration of system, even under the same friction interface. However, there is limited report on the friction-induced vibration of mechanical system under different vibration transmission paths. Therefore, the effect of structural stiffness in vibration transmission path on friction-induced vibration is investigated and discussed.

Methodology: The friction tests are carried out on a small-scale tribometer, which achieves a frictional contact between the balls and disc samples. The structural stiffness of vibration transmission paths is reflected by different fixtures of samples, whose dynamic characteristics are tested by the hammer method. In addition, a detailed three-dimensional finite element model based on different structural stiffness in vibration transmission paths is established to simulate the experimental process. At last, a four-degree-of-freedom friction-induced vibration model, including the interaction between the structure characteristics and the friction interface, is established to investigate the influence of the vibration transmission paths on the system stability.

Results: The instability of the friction system decreases with the increasing structural stiffness in vibration transmission path. However, when the structural stiffness exceeds the critical value, the instability of friction system is excited again, accompanied by severe friction-induced vibration and high frequency squeal noise. Similarly, the wear morphology is also influenced by vibration transmission paths. The higher structural stiffness is, the better tribological behavior of the contact interface is displayed. Once the critical stiffness is exceeded, more complicated tribological behavior of the contact interface is shown.

Limitations of this study: Applying the findings to practice system is still under studied since a real friction system is much more complex comparing to the customized small-scale tribometer.

What does the paper offer that is new in the field in comparison to other works of the author: The effect of structural stiffness in vibration transmission path on friction-induced vibration is investigated. The conclusions obtained by experimentally and numerically are beneficial for understanding the effect of structural stiffness in vibration transmission path on stability, vibration response and tribological behavior of the friction system.

Conclusion: The results show that the stability and vibration response of the friction system is significantly affected by vibration transmission paths. Evaluating and eliminating the influence of vibration transmission path on the friction-induced vibration is extremely crucial and meaningful for investigating the generation mechanism of the friction-induced vibration more precisely.

EuroBrake 2021

MMD

WATCH VIDEO
DOWNLOAD PDF
DOWNLOAD SLIDES

Downloads

LOAD MORE

Error message goes here.

SEARCH

Person profile goes here.

China

PHD student

Company Text

Job title

Company Name

Company Text

Dr. Zaiyu Xiang

FISITA Committees & Groups

Executive Board

News on FISITA Spotlight

16 July 2021

Spotlight title

Stay up to date with FISITA Spotlight

More Blogs Item Title

Excerpt from the blog goes here - this will give the reader a brief snapshot of what the post is about...

16 July 2021

READ NOW
bottom of page