top of page

At Lapinus, we offer premium quality mineral fibres, Promaxon D and strong technical support for the friction industry.

We go beyond being raw material supplier by researching the functionalities of our products together with other materials in the friction matrix. Rise to global challenges for friction, our team continuously drives innovation for better solutions together with our customers. Rooted in sustainability, our highly bio-soluble products contribute to shaping a better world for today and tomorrow.




Stay up to date with FISITA Spotlight

More Blogs Item Title

Excerpt from the blog goes here - this will give the reader a brief snapshot of what the post is about...

16 July 2021


See FISITA Library items from Lapinus



Dr. Carlos Lorenzana, Chief Innovation Officer, RIMSA METAL TECHNOLOGY, SA; Dr. Adnan Safraz, Development Manager Automotive, Lapinus; Dr. Andrea Sliepcevich, R&D Manager, Quartz Srl


The future of Mobility is closely related to the fight against climate change, through the limitation of emissions of all kinds to conclude with the complete electrification of the mobile fleet. In the context of the Green Deal and the objectives of "carbon neutrality" and "zero pollution", the European Commission has committed to reducing current emission limits, from all sources. Brake wear is a significant contributor to respirable particulate matter (PM10 aerodynamic diameter less than 10 µm), particularly in areas with high traffic density and frequent braking. How far emission regulation and electrification may transform the friction industry is still to see. The application of surface technology to the rotor can technically solve this problem and several technologies are being evaluated. But changes in the rotor material induce changes in the response of the friction material, and those can be different depending on the type of friction material and the coating material and technique. In this conference we will be showing some of the changes in tribochemistry and friction response related to the use of coatings, with different carbide coatings. When a hard coating is applied on the rotor, the traditional pad/rotor wear mechanism is affected. The transfer of material from the rotor (in form of iron oxide) is minimized and can even be dismissed. Abrasive wear of the friction material then become the main wear mechanism of the new friction pair. Then the raw materials used in the pad have a big influence on this behaviour. In a joint research work by Rimsa, Quartz and Lapinus, tribological data have been obtained through simulated SAE standard tests by using brake pad screening tribometer, and Tribochemistry was studied by SEM-EDS. We expect to contribute with this work to further build a deep knowledge of how coating parameters may affect the friction behavior of friction materials, allowing the community to find new ways to use more sustainable materials for wear resistant coating.

EuroBrake 2023

Rotor based fundamentals



From Adhesive wear to Abrasive wear mechanism when switching from conventional rotors to hard coated rotors, EB2023-CMT-019, EuroBrake 2023




Dr. Neomy Zaquen, Lapinus, NETHERLANDS

Mr. Arno Kerssemakers, Lapinus, NETHERLANDS

Mr. Fernao Persoon, Lapinus, NETHERLANDS

Global emission – due to pollution and the use of fossil fuels – has risen drastically since the start of the industrial revolution and is at the core of the problems within the current society. Within the automotive industry, not only the exhaust of vehicles is seen as a large contributor to pollution, also wear of the tires and the brake pads of vehicles contribute to pollution in the form of emission. In 2015 it was concluded that PM2.5 as a direct result of disc brakes, contributes to high percentages of the total amount of non-exhaust emission from road transport within the EU. Due to the severe adverse health effects of PM, the EU has defined general emission guidelines for both fine (PM2.5) as well as coarse (PM10) particle matter. We expect these values to be translated to the automotive industry in the (near) future.

Within Lapinus, we actively investigate the reduction of emission as a direct result of wear of disk brake pads. By using our engineered mineral fibre, friction levels are stabilized and both pad as well as disc wear are reduced, due to the formation of a stable third body layer. Previous studies on mineral fibres have shown the friction performance when using different grades and morphologies of fibres in the friction matrix. While shorter fibres act as anchoring point, engineered fibres spheres can collect wear debris during braking, leading to overall reduced wear.

In this study, a closer look into the formation of the tribolayer was taken when using a NAO/non-steel formulation. Mineral fibres of different length as well as engineered fibre spheres were added to the friction matrix to correlate the impact of performance with the tribolayer formation. Dynamometer full scale tests were executed to compare the friction performance, stability of the friction level and wear of the different (non)-spherical materials. The tribolayer formed on the brake pad surface – and related to that disc surface – was studied by means of SEM-EDX and optical microscopy.

This work shows the importance of mineral fibres not only from a performance, but also tribolayer point of view. Especially the use of engineered fibre spheres leads to new insights with respect to the tribolayer. Combined with the excellent friction performance and decreased wear, this work can be considered an important solution towards the reduction of non-exhaust emissions.

EuroBrake 2021




Correlation between Friction Performance and Tribolayer Formation Using Engineered Mineral Fibres, EB2020-MDS-003, EuroBrake 2021



Persoon, Fernao*; Tegels, Desiré; Santamaria Razo, Diego Adolfo; Kerssemakers, Arno
Rockwool B.V. LAPINUS FIBRES, the Netherlands


Engineered mineral fibres from LAPINUS are used globally in friction applications. They give the friction material a combination of mechanical and tribological properties, in both NAO/nonsteel and low steel formulations. Mineral fibres have a pronounced effect on the micrometric scale at the surface of the brake material. They can act as an anchoring point, which effectively promotes the third body layer formation and development. As a result, friction stability and wear resistance are improved. They also influence friction level due to their chemical composition and their contact and interaction with the counterpart, the metallic disc.

With regard to health and safety aspects, these mineral fibres have the important property that they are certified as bio-soluble, which is determined by the specific chemistry. The chemical tolerance range of bio-solubility can be effectively controlled during the production process. Thanks to this, it is possible to offer two different bio-soluble fibre grades to the friction industry.

The fibre chemistry is one of the key characteristics for the unicity of these mineral fibres. The chemical composition has a significant effect on the production process and therefore on the specific physical properties of the mineral fibres. This directly influences friction performance and pad and disc wear.

This paper describes the effect of fibre properties, such as chemical composition and fibre diameter, on friction performance in disc pad applications. The paper shows test results of a new mineral fibre grade, which has been specially developed to offer an alternative performance to current products with the aim of reducing disc wear. This new product consists of a different chemical composition without compromising the bio-solubility of the fibres. It is shown that overall friction and wear performance are influenced, which opens up new possibilities for friction material formulations.

The study shows the friction performance of NAO copper-free materials with the focus on the specific role of the chemical composition of two different mineral fibres at the surface layer of brake pads. With the development of a new fibre grade, it is possible to promote third body layer formation and stabilisation of the friction level, without this having an aggressive effect on the disc surface. With this development it is foreseen that this newly engineered fibre can complement future formulations in reducing wear, and therefore also dust emissions (e.g. wheel dust).

EuroBrake 2016

Modelling & Simulation (MDS)



Bio-soluble Mineral Fibres: Alternative Chemical Compositions And The 
Effect In Disc Pad Applications, EB2016-MDS-003, EuroBrake 2016

Error message goes here.

bottom of page